The BCD325P2 Police Scanner Radio...
This product is no longer in stock
The Uniden BCD325P2 Digital Police Scanner Radio has it all. This handheld scanner comes equipped with features like Advanced Dynamic Memory System, Close Call RF™ Capture Technology, location based scanning, and more. You can order this hand held scanner with or without programming and choose from a host of desirable accessories and add-ons, such as GPS capabilities, headphones, cables, and more. Comparing different Uniden scanners? Read up on all the features, listed below.
25,000 Dynamically Allocated Channels with Close Call Technology
Scan and search 25,000 channels on the BCD325P2. With Close Call RF capture technology, this scanner will automatically tune to the signals nearest you, so you can keep track of what's going on in your area.
The BCD325P2 scanner allows you to quickly access the systems you us the most often with the 100-key system. Unidens Police Scanners feature simple to set up keys to the systems you want to hear. Press them to enable or disable the system.
Connect this scanner to a compatible GPS receiver and it will automatically select programmed systems based on your exact location. You'll save time by scanning only the local signals.
This mobile scanner supports Specific Area Message Encoding weather alerts. During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area.
This Uniden scanner features TrunkTracker V with Control-Channel Only scanning and I-Call monitoring, which allows you to track voice traffic on P25 APCO 25 Phase I & II, Motorola, EDACS, and LTR Trunked systems. Trunk tracking allows you to follow whole conversations, even if they occur across different frequencies.
County Programming removes the guesswork, tedium, and frustration from manually programming your scanner for your area. Our programming department will preload your selected county/county's public safety frequencies so all you have to do is turn it on.
Included Service Types:
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|Display Color||Orange Backlit LCD|
|Number Of Channels||25,000|
|Programming Services Available||Yes|
|Reception Type||Analog - Trunking - Digital -Digital Phase ll|
|In The Box||1X- BCD325P2 Scanner 1X- Antenna 1X- USB Cable 1X- Hand Strap 1X- Rechargeable AA Ni-Mh batteries (2) 1X- Belt Clip (attached)|
|Operating System Supported||Windows - 2000 - XP - Vista - 7 - 8 - 10|
|Scanning Speed||100 Channels Per Second|
|DMR Capable||(Paid Upgrade Required)|
|ProVoice Capable||(Paid Upgrade Required)|
|System Upgrades||DMR + ProVoice (Paid Upgrade Required)|
If there is any sort of glitch in the power, it will reset the charging dock. Therefore, the screen will continue to state it is charging.
Handheld scanners are powered on by pressing the power button which has the Universal Power symbol:
Yes, the BCD325P2 does cover this type of system.
Unfortunately, Programming digital scanners is difficult without experience. We recommend you use programming software or have the Radio pre-programmed before shipment.
We can program up to 8 counties, we charge $70 for the first county & $35 per additional
The BCD325P2 doesn't come with any pre-programmed software. This one would require programming before use. We do offer programming for this scanner.
With our county programming service, we only offer to program frequencies in the USA. Police, Fire & EMS frequencies would be included. The GPS Antenna will scan the frequencies you have pre-programmed into the radio and play them based on GPS location.
The information below is on page 18-19 of the product manual
USING BATTERIES You can power your BCD325P2 using two alkaline or rechargeable AA batteries 1. Remove battery cover and install 2 AA batteries, matching the polarity symbols (+ -). 2. Replace the cover. Caution: There is no switch for the battery type. Never attempt to charge nonrechargeable batteries. Non-rechargeable batteries can get hot or burst if you try to recharge them. If the scanner detects batteries that cannot be charge, it displays “Battery Error.”
When battery icon flashes and the scanner beeps every 15 seconds, replace or recharge the batteries. The scanner has a built-in circuit that lets you recharge rechargeable batteries while they are in the scanner. When the scanner is turned on, the scanner will not charge the batteries. When the scanner is turned off, the scanner will charge the batteries. Plug the USB cable into the scanner when the scanner is off and “Battery Charge” - “Start Charging? Yes = “E”/ No = “.” will display. Press E/yes. The scanner displays “Normal Charging” and charges the batteries according to the “Set Charge Time” setting. When charging is finished “Charge Complete” will be displayed. Note that the charge is controlled strictly by a timer. It is impossible to detect the charge state of cells charged at the low rate the scanner uses or when v
Do you have a question about your order status or a purchase you are considering? We're here to help!
|Address:||6030 Marshalee Drive, Suite 721, Elkridge, MD 21075|
Mac Support Assistant
Windows Support Assistant