|
 |
| UNIDEN | BCD396T Digital Trunking HandHeld Scanner |
|
|
|
Brand New Scanner Factory Sealed
The BCD396T comes equipped with features like Advanced Dynamic
Memory System and CloseCall RF™ Capture Technology
|
|
|
|
ALL OF OUR SCANNERS ARE BRAND NEW FACTORY SEALED UNITS
If you would like to add programming scanner software with your order click Here
If you would like us to program your scanner with your hometown frequencies click here
Includes:
- BCD396T Scanner
- AC adapter
- PC Programming Cable
- Detachable Antenna
- Heavy Duty Belt Clip
- BNC Antenna Adapter
- PC Control/Programming Software
- 3 AAA Rechargeable Batteries
- Owner's Manual
BCD396T Compact Handheld Digital Trunking Scanner
- TrunkTracker IV (Motorola APCO 25 Digital, Motorola, EDACS, LTR)
- 6000 Dynamically Allocated channels
- Close Call™ RF Capture Technology - Instantly tunes to signals from nearby transmitters
- Fire Tone-Out
- Alpha Tagging
- 100 Quick Key System Access
- Preprogrammed Coverage of Over 400 Cities
- Continuous Band Coverage* - 25MHz to 1.3GHz Excluding UHF TV and Cellular
- Compact Size
- Audio AGC
- Automatic Digital Threshold Adjustment
- Search with Scan
- DCS/CTCSS Rapid Decode - Instantly Detects and Displays the Subaudible Tone So You Can Quickly Determine the System Settings.
- S.A.M.E. Weather Alert - Specific Area Message Encoding - During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area.
- PC Control/Programming (Software Included)
- Public Safety Scanner
Analog and Digital Audio AGC – Helps automatically balance the volume level between different radio systems.
Fire Tone-Out Standby – Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 10 settings (transmit frequency, tone frequencies) then select one for standby monitoring.
Broadcast Screen – Sets the scanner so it ignores close CallTM or search hits on known broadcast frequencies including pager frequencies.
Custom Screen – Lets you input up to 10 frequency ranges that the scanner will ignore during Close CallTM or search operation.
Dropout Delay – You can set whether the scanner pauses at the end of a transmission to wait for a reply. You can set the delay time for each system you scan, and while searching and using the Close CallTM feature.
Attenuator – You can set the scanner’s attenuator to reduce the input strength of strong signals by about 18 dB.
Repeater Reverse – You can set the scanner so it switches to the input frequency on a conventional repeater system.
Channel Alert – You can set the scanner so it alerts you when there is activity on any channel you specify.
Memory Check – Lets you see at a glance how much total memory is left.
Scan and Search Operation – Lets you include selected service searches or custom search ranges during normal scan operation.
Custom Alerts – For each alert in the scanner (such as channel alert, Close Call alert, emergency alert), you can select from 9 different tone patterns and also set the alert volume level independently from the main volume level. 13
Automatic Channel Step – Accepts frequencies on any valid channel step, even if it does not fall within the band plan’s default step.
Frequency Step – Lets you select a frequency step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) for manual mode and chain search mode. The scanner’s auto step feature lets you set the scanner so it automatically chooses the correct step.
Quick Recall – Lets you quickly select a specific channel by choosing the system, group, and channel.
Scan/Search Delay – You can set the scanner so it remains on a frequency up to 5 seconds after the last transmission to wait for a possible reply.
Text Tagging – You can name each system, group, channel, talk group ID, custom search range, and SAME group, using up to 16 characters per name.
Unique Data Skip – Allows your scanner to skip unwanted data transmissions and reduces birdies.
Duplicate Frequency Alert – Alerts you if you try to enter a duplicate name or frequency already stored in a system.
Memory Backup – If power is lost or disconnected, the scanner retains the frequencies you programmed in its memory.
Note: The scanner’s frequency coverage is not continuous and does not include the cellular telephone or UHF TV bands.
Trunk Tracker IV™ Operation – Follows unencrypted conversations on analog Motorola, Motorola Astro 25 (APCO 25), EDACS, EDACS SCAT, and LTR trunked radio systems, including systems in VHF, UHF, 700 MHz, 800 MHz, and 900 MHz bands. The scanner can scan both conventional and trunked systems at the same time.
Control Channel Only Scanning – If the scanner is set to scan Motorola trunking frequencies, you can set it so it scans using only control channel data. You do not have to program voice channel frequencies into memory in this mode as long as all possible control channels are programmed.
Adaptive Digital Threshold – Automatically sets the digital decode threshold for APCO 25 systems.
Weather Search – Lets your scanner receive your local NOAA weather transmission.
SAME Weather Alert – Lets your scanner alert you when a SAME weather alert is transmitted on a NOAA weather channel. The scanner also displays the transmitted alert type. This helps you quickly find out about severe weather in your area and lets you avoid false alarms.
WX Priority – Lets your scanner alert you when a SAME weather priority alert is transmitted on a NOAA weather channel.
Service Search – Lets you quickly select and search the scanner’s preprogrammed frequencies.
Custom Search – Lets you program up to 10 custom search ranges. You can search any of these ranges simultaneously.
CTCSS/DCS Search – Lets the scanner search for CTCSS or DCS tones. You can identify up to 50 CTCSS tones and 104 DCS tones.
Quick Search – Lets you search from the currently-tuned frequency if you are searching a conventional system.
Frequency AutoStore – Automatically stores all active frequencies into the selected conventional system.
-
Scanner Manual
|
| Related Products: |
|
|
