WE ONLY SELL NEW PRODUCTS

• Channel Memory Scanning— Scans frequencies you have stored inany of the channels or banks at a rate of up to 60 channels per second.
• Memory Availability— Store and then scan any of up to 100 channelsdistributed over 10 banks.
• Direct Channel Access— Press 0−9andHOLDto directly access anystored frequency.
• Channel Lockout/Frequency Lockout— Skip over stored frequencies(channels) using the Lockout feature to enable faster scanning. Lets youdesignate up to 50 frequencies to skip during a search (limit or service) toincrease the scanning speed.
• Alarm Clock with Snooze— provides standard radio broadcasts thatyou can set as your alarm sound.AM/FM and TV 2-13 Broadcast— lets you store up to 30 presetbroadcast channels (10 AM and 20 FM/TV) for quick access.
• Priority Channel— Designate a specific frequency as a Priority Channel. Then the radio scans and checks that channel every 2 seconds.Select and designate up to 10 frequencies as Priority Channels (one perbank).
• Duplicate Channel Alert— Lets you know that a selected frequency hasalready been programmed into memory if you attempt to store it again.
• Limit Frequency Searching— Lets you designate lower and upperfrequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
• Service Search— Lets you designate one of the five preprogrammedservice channels (Police, Fire/EMS, Air, Ham, Marine) to search.
• Weather (WX) Scan— Scan the preprogrammed weather channels.Scan and Search Speed•Scan Speed60 channels per second maximum in SCAN MODE.•
• Search Speed 60 steps per second maximum in SEARCH MODE.•TURBO MODEFor frequency steps 5kHz apart, searching occurs in Turbo Mode which is 180 steps per second.
• Clock Display— the scanner, in standby mode, displays the time. The clock also features an alarm that can sound up to 20 minutes or beshut off manually. Aconvenient snooze button lets you silence the alarmfor an extra 5-minutes.
• Delay— you can enable or disable the 2-second delay to resumescanning when a transmission ends. Enabling this feature helps preventmissing a response from one of the parties in the transmission.
• LCD Backlight— you can enable or disable the LCD back lighteddisplay.
• Key Touch Tone— a tone sounds to confirm you have made a valid keyinput while a different tone sounds to alert you to an invalid entry.
• EEPROM Memory Backup— the scanner uses a non-volatile EEPROMfor memory backup.
• Battery Alert— Abattery icon alerts you to a no battery installedcondition, and a battery low voltage condition. An alert tone sounds whenthe battery needs to be replaced. The backup provides backup for theclock when power is off and will power scanning for a short time.
• Auto Power Off— turns the scanner off when the battery power gets too low.